[PRNewswire] Scantech Calibration Center is ISO/IEC 17025:2017 Accredited
이 글자크기로 변경됩니다.
(예시) 가장 빠른 뉴스가 있고 다양한 정보, 쌍방향 소통이 숨쉬는 다음뉴스를 만나보세요. 다음뉴스는 국내외 주요이슈와 실시간 속보, 문화생활 및 다양한 분야의 뉴스를 입체적으로 전달하고 있습니다.
(HANGZHOU, China, May 13, 2022 PRNewswire=연합뉴스) Scantech [https://www.3d-scantech.com/ ], a global 3D measurement company specializing in developing and selling 3D scanners, is delighted to announce that our Calibration/Certification Laboratory Center (CAL/CERT Center) has received the ISO/IEC 17025:2017 accreditation from China National Accreditation Service for Conformity Assessment (CNAS).
It is our great honor to be the first enterprise calibration laboratory that receives accredited CMC with JJF 1951-2021 Specification[1](to be officially implemented on June 28th, 2022) from CNAS in China.
Scantech Calibration Center, set up in 2020, is now ISO/IEC 17025:2017 accredited. It shows that our center is technically qualified to carry out traceable measurements and calibrations according to national specifications and international standards in optical 3D scanning measurement and calibration.
It means that the calibration and acceptance test of our handheld 3D scanner, global 3D scanner, composite 3D scanner, optical tracking 3D scanner, and automated 3D measurement system are based on JJF 1951-2021 specification and VDI/VDE 2634 standard[2]. The 3D scanners of these line-ups will be assigned with fully traceable and internationally recognized accuracy certificates.
Fale Fang, Director of Scantech Calibration Center says, "The certification of ISO/IEC 17025:2017 is the fruit of numerous years of efforts. It shows the commitment and dedication of the professional staff at Scantech in the field of metrology. "
Scantech quality management system is accredited with ISO 17025:2017, ISO 9001:2015[3], ISO 14001:2015[4], and ISO 45001:2018[5] standards, showing full competencies with the international testing standard in the field of metrology. Besides the rigorous quality management systems [https://www.3d-scantech.com/certifications/ ], all handheld 3D scanners manufactured by Scantech have received the CE[6] marking.
[1] JJF 1951-2021: Calibration Specification for optical 3D measurement system based on structured-light.
[2] VDI/VDE 2634 Part3: 2008 Optical 3D measuring systems: Multiple view systems based on area scanning.
VDI/VDE 2634 Part2: 2012 Optical 3D measuring systems: Optical systems based on area scanning.
[3] An international standard that specifies requirements for a quality management system (QMS).
[4] An international standard that specifies requirements for the environmental management system (EMS).
[5] An international standard that specifies requirements for an occupational health and safety management system (OHSMS).
[6] This marking certifies that the product met safety, health, and environmental protection requirements.
About Scantech
Scantech is specialized in the development, manufacture, and sale of 3D scanners. Our in-house developed products range from handheld laser 3D scanners, color 3D scanners to automated 3D scanning solutions.
Source: SCANTECH
[편집자 주] 본고는 자료 제공사에서 제공한 것으로, 연합뉴스는 내용에 대해 어떠한 편집도 하지 않았음을 밝혀 드립니다.
(끝)
출처 : PRNewswire 보도자료
Copyright © 연합뉴스 보도자료. 무단전재 및 재배포 금지.
- "과채 가격도 부담"…1년 전보다 방울토마토 42%·참외 36% 올라 | 연합뉴스
- 한발 물러선 정부…의사단체는 '균열' 속에서도 "원점 재검토" | 연합뉴스
- 美당국자 "한국이 中경제강압 직면하면 할수있는일 다할것" | 연합뉴스
- '청년희망적금→청년도약계좌' 50만명 육박…4명 중 1명꼴 가입 | 연합뉴스
- 출시 석달만에 5조원 넘긴 신생아 대출…3분기엔 소득기준 완화 | 연합뉴스
- 협상장 나온 하마스 '단계적 종전' 제안…이스라엘은 불참 고수 | 연합뉴스
- 어린이손님에 '부모님이나 데리고 와'…"일상속 차별 너무 많죠" | 연합뉴스
- 공수처, '채상병 의혹' 김계환 해병대 사령관 15시간 조사(종합2보) | 연합뉴스
- 여야 원내지도부 재정비…22대 국회 길목서 특검 대치 | 연합뉴스
- 추경호, 與원내대표 출마…"유능한 민생·정책정당 명성 되찾겠다"(종합) | 연합뉴스