[AsiaNet] Polyplastics Introduces Innovative Bonding Technology to Join
이 글자크기로 변경됩니다.
(예시) 가장 빠른 뉴스가 있고 다양한 정보, 쌍방향 소통이 숨쉬는 다음뉴스를 만나보세요. 다음뉴스는 국내외 주요이슈와 실시간 속보, 문화생활 및 다양한 분야의 뉴스를 입체적으로 전달하고 있습니다.
Different Resin Materials
AsiaNet 94129
(TOKYO, Jan. 20, 2022 AsiaNet=연합뉴스) Polyplastics Co. Ltd., a leading global supplier of engineering thermoplastics, has introduced an innovative bonding technology that is unlike traditional joining methods such as plastics welding or adhesion. AKI-Lock (R) has few restrictions on the materials that can be used and forms strong, airtight bonds with combinations of different materials for which bonding had previously been difficult.
Image: https://kyodonewsprwire.jp/prwfile/release/M100475/202201055733/_prw_PI1fl_mVEqPtui.jpg
AKI-Lock (R) opens the door to a broad range of new product development possibilities. This bonding technology meets the increased market demand for weight reduction to address the U.N. SDGs (Sustainable Development Goals), reduces the number of parts, and provides stable adhesive strength and longevity.
The AKI-Lock (R) technology uses the glass fibers in glass fiber-reinforced resins as a physical anchor for bonding. Glass fiber is made bare by laser irradiation which is completed in a grid pattern. Strong bonds can then be achieved by pouring the resin to be bonded onto these anchors. Since the bond is formed by physical anchors, there is no time limitation from laser treatment until bonding. Masking is unnecessary since specific treatment areas can be identified. There is no need for etching solution to roughen the surface and no waste liquids or materials are produced.
Airtightness is greatly enhanced due to three factors: the effect of resin entering and filling the gaps between the glass fibers; deformation in the grooves of the primary material due to the shear flow force of the secondary material; and crimping from mold shrinkage of the secondary material.
AKI-Lock (R) helps to reduce assembly work and the number of components, thus lowering overall cost. The joining system also helps to reduce an environmental impact through the use of dry processes, including the elimination of adhesives.
For more information, visit: https://www.polyplastics-global.com/en/approach/9.html
About Polyplastics:
https://kyodonewsprwire.jp/attach/202201055733-O1-4OD3syDS.pdf
* AKI-Lock (R) is a registered trademark of Polyplastics Co., Ltd. in Japan and in other countries.
Source: Polyplastics Co., Ltd.
[편집자 주] 본고는 자료 제공사에서 제공한 것으로, 연합뉴스는 내용에 대해 어떠한 편집도 하지 않았음을 밝혀 드립니다.
(끝)
출처 : 아시아넷 보도자료
Copyright © 연합뉴스 보도자료. 무단전재 및 재배포 금지.
- 美, 중국산 전기차 관세 25→100%·태양전지 25→50%로 대폭인상 | 연합뉴스
- 의사 평균 연봉 3억원 넘었다…정부 "수급 부족 탓" | 연합뉴스
- 대통령실 "라인야후 보고서에 네이버 지분매각 포함 안 될 것(종합) | 연합뉴스
- 尹대통령, 젤렌스키 우크라 대통령과 통화…"지원·협력 계속" | 연합뉴스
- 이원석 "인사는 인사, 수사는 수사…어느 검사장 와도 원칙대로"(종합2보) | 연합뉴스
- 與주류, '김여사 방탄공세' 일축…유승민 "영원히 덮을순 없어"(종합) | 연합뉴스
- [아프리카를 가다] ④ K드라마에 태권도…보츠와나서 한류 바람 | 연합뉴스
- USTR "對중국 관세 부과 이후 한국 반도체 등이 중국산 대체" | 연합뉴스
- 與전대 최대변수 떠오른 한동훈…총선 책임론 공방도 가열(종합) | 연합뉴스
- 진성준 "전국민 25만원法, 당론 발의…與와 선별지급 협의 가능" | 연합뉴스