Sintavia Expands Rocket Manufacturing Capability with Two M4K-4 Printers from AMCM GmbH

2021. 1. 14. 15:17
글자크기 설정 파란원을 좌우로 움직이시면 글자크기가 변경 됩니다.

이 글자크기로 변경됩니다.

(예시) 가장 빠른 뉴스가 있고 다양한 정보, 쌍방향 소통이 숨쉬는 다음뉴스를 만나보세요. 다음뉴스는 국내외 주요이슈와 실시간 속보, 문화생활 및 다양한 분야의 뉴스를 입체적으로 전달하고 있습니다.

HOLLYWOOD, Fla. -- Businesswire -- Sintavia, LLC, a designer and additive manufacturer of critical thermal components for the Aerospace, Defense, & Space industry, announced today that it had acquired two M4K-4 printers from AMCM GmbH of Starnberg, Germany. Each of the two new M4K-4s, which are stretched versions of the commercially successful EOS M400-4 printer, uses four 1kW lasers to print single-unit components with dimensions of 450mm x 450mm x 1m. As one of the largest rocket printers in North America, Sintavia will use the new machines to expand its portfolio of thrust chamber design and manufacturing for the rapidly growing commercial space industry.

“Since the acquisition of our first M400-4 three years ago, Sintavia has devoted tremendous resources to developing successful and repeatable operating procedures for the quad laser printing of extremely thin walls, such as those found in the thrust chamber of a rocket,” said Brian Neff, Sintavia’s Chief Executive Officer. “We now have eight M400-4 quad laser printers, and we expect that the successful strategies employed on the M400-4 will likewise work on these new M4K-4 units. We are pleased that we will be the first rocket printer in North America to offer the expanded footprint of the M4K-4 to our commercial space customers.”

Developed by AMCM, an affiliated company of EOS GmbH, the M4K-4 is a stretched and widened version of the EOS M400-4 printer, with more powerful lasers and an upgraded cooling system. The design of the M4K-4 was driven largely by demand from commercial space launch customers who were looking to optimize thrust chamber assemblies with fewer traditional joining steps. For most existing commercial rocketry currently in production today, the M4K-4 is able to manufacture the entire thrust chamber assembly as a single unit, including optimized regenerative cooling passages, thereby dramatically reducing manufacturing complexity and time. The two new printers will be delivered in June and July of 2021, and will be installed in high performance copper and nickel alloys.

About Sintavia

Sintavia designs and 3D prints a new generation of flight and launch products for the Aerospace, Defense & Space industry. The company's ability to design and serially produce thermally engineered components with complex structural walls of less than 150 microns has unlocked a level of performance impossible to achieve using traditional manufacturing methods. With 26 high-speed printers co-located alongside precision post processing equipment, a full complement of mechanical testing equipment, and a full metallurgical and powder laboratory, Sintavia is able to optimize parameters, serially manufacture, and audit quality parts for aerospace applications. A founding member of the Additive Manufacturer Green Trade Association, Sintavia is committed to the highest quality standards in the industry and holds multiple Nadcap and other aerospace accreditations.

For more information, visit http://www.sintavia.com.

View source version on businesswire.com: https://www.businesswire.com/news/home/20210113005134/en/

이 뉴스는 기업·기관·단체가 뉴스와이어를 통해 배포한 보도자료입니다.

출처:Sintavia, LLC

보도자료 통신사 뉴스와이어(www.newswire.co.kr) 배포

Copyright © 뉴스와이어. 무단전재 및 재배포 금지.

이 기사에 대해 어떻게 생각하시나요?